Single-use filter
Single-use systems minimize cleaning, save time and increase safety. Especially in small-scale production or multi-production facilities.
Typical applications for Single-use filters:
- Upstream cell culture
- Virus filtering in disposable lines
- Final filtration in fill and finish
- Mobile bioprocess modules
Our Subcategories:
CIP and SIP compatible filters
Disposable filters and canisters
Filters for fermentation and bioreactors
Filters for cosmetics and hygiene products
Filters for laboratory and analytical environments
15+
Filters for pharmaceuticals and biotechnology
Filters for the food and beverage industry
Filters for viscous liquids
Filters for water treatment and RO protection
Pre-filtration
High temperature filtration
Chemical-resistant filters
Clear filtration and depth filtration
Air and gas filtration
Process gas filtration
Single-use filter
sterile filters
Tank ventilation
TFF and Hollow Fiber
Virus filtering
Amount of products: 9
-
CIP and SIP compatible filtersPropor HC - High capacity sterile liquid filters
PROPOR HC sterile grade filters are specifically designed for efficient and cost-effective filtration of difficult-to-filter solutions.Parker Hannifin -
CIP and SIP compatible filtersTETPOR PLUS - Chemical-resistant fluoropolymer filters
TETPOR PLUS filters are made entirely of fluoropolymers, making them highly resistant to a wide range of aggressive chemicals. TETPOR PLUS filter cartridges are specifically designed for the filtration of liquids and gases in the bulk pharmaceutical industry, the chemical industry and biopharmaceutical processes where particle separation, bioburden reduction and guaranteed sterility are required. The increased use of ozonation in the treatment of WFI systems has highlighted compatibility issues with vent filters based on standardized polypropylene components. The introduction of a fully validated TETPOR PLUS filter cartridge with sterilization-grade 0.2 μm membrane provides long-term and safe performance in these applications, with the added benefit that filter integrity can be verified by water ingress testing. The high pore volume of the single-layer PTFE membrane ensures an excellent combination of flow rate and retention. TETPOR PLUS series are available in a variety of configurations. For further information, please refer to the technical data sheet of the product. -
Disposable filters and canistersProclear PP - Liquid pre-filter
PROCLEAR PP+ filters are designed to provide excellent retention and dirt holding capacity in pharmaceutical pre-filtration applications. Polypropylene-based filter media with optimized depth structure provide excellent retention and dirt holding properties, while ensuring broad chemical compatibility. Meltblown polypropylene depth filter media offer low levels of extractables compared to glass fiber or cellulose materials, while maintaining similar retention properties. PROCLEAR PP+ series are available in a variety of configurations. For further information, please refer to the technical data sheet of the product.Parker Hannifin -
CIP and SIP compatible filtersPropor SG - Sterile liquid filters
PROPOR SG sterile grade filters are equipped with a microbially retentive polyethersulfone membrane that enables fast, reliable and cost-effective sterile filtration of pharmaceutical liquids.Parker Hannifin -
Disposable filters and canistersPropor BR - Bioburden reducing liquid filter
PROPOR BR filters are specifically designed for fast and cost-effective bioburden reduction of pharmaceutical solutions. The integrated melt-blown prefiltration layer provides high dirt holding capacity, while the polyethersulfone membrane ensures a bioburden reduction of >5 log and thus excellent microbial protection. This makes PROPOR BR filters ideal for bioburden reduction of LVP products prior to terminal sterilization. PROPOR BR filters are also excellently suited as pre-filter and bioburden reduction step before sterilization-grade membrane filters. The robust design ensures consistent filtration performance over multiple batches. PROPOR BR series are available in a variety of configurations. For further information, please refer to the technical data sheet of the product.Parker Hannifin -
Disposable filters and canisters
Propor MR - Sterile liquid filters for the removal of mycoplasma
PROPOR MR filters are specifically designed for the rapid, efficient and cost-effective removal of mycoplasma from cell culture media in the biopharmaceutical industry. The highly retentive PES membrane with a nominal pore size of 0.1 μm is validated against the industry standard Brevundimonas diminuta as well as Acholeplasma laidlawii, a common mycoplasma species in contaminated cell cultures. An asymmetrically integrated membrane prefilter gives PROPOR MR the optimal membrane configuration for maximum capacity and high flow rates. Fast process times minimize the risk of contamination while ensuring maximum protection against mycoplasma. PROPOR MR series are available in a variety of configurations. For further information, please refer to the technical data sheet of the product.Parker Hannifin -
Disposable filters and canistersProclear GF - Glass microfiber-based liquid pre-filters
PROCLEAR GF filters are designed for reliable and cost-effective removal of particles and microorganisms from pharmaceutical liquids. The fiber-free filter with glass microfiber media provides excellent dirt-holding capacity and high flow rates, contributing to long service life and efficient, economy-optimized filter system design. PROCLEAR GF filters have low levels of extractables and are therefore ideal for general clarification and pre-filtration steps in pharmaceutical production. PROCLEAR GF series are available in a variety of configurations. For further information, please refer to the technical data sheet of the product.Parker Hannifin -
CIP and SIP compatible filtersTETPOR LIQUID - Chemical resistant sterile liquid filters
TETPOR LIQUID filters are particularly suitable for sterilizing and separating particles from aggressive chemicals (including acids, bases and solvents) in a range of critical process industries. The superior performance, strength and durability of TETPOR LIQUID filters comes from the use of a single-layer, high-security PTFE membrane with high dirt holding capacity due to its large pore volume. This results in low pressure drops and long service life. High flow rates are achieved through optimized pleat density and the superior structural design of TETPOR LIQUID filters. TETPOR LIQUID series are available in a variety of configurations. For further information, please refer to the technical data sheet of the product.Parker Hannifin -
CIP and SIP compatible filtersPROPOR LR - Sterile 0.1 micron liquid filters
PROPOR LR filters have been specifically developed for high flow rates and effective removal of Ralstonia pickettii and other small microorganisms. Several studies have shown that not all microorganisms are removed by 0.2 micron-rated membranes under all conditions. PROPOR LR filters utilize a 0.1 micron-rated membrane that can remove very small organisms while maintaining flow rates typical of a 0.2 micron filtration system. Ralstonia pickettii is an organism that has often been shown to penetrate 0.2 micron membranes and is a common contaminant in clean water systems. PROPOR LR filters have been validated directly against Ralstonia pickettii removal. PROPOR LR series are available in a variety of configurations. For further information, please refer to the technical data sheet of the product.Parker Hannifin
"*"indicates required fields
Do you have questions about filters? Do not hesitate to contact me
Patrik Andersson
Product Specialist - Filter
Phone:
+46 76 492 03 89
Email:
patrik.andersson@colly.se
Do you want to find contact details for a specific person or office?
Here you will find all our contact details.
With Colly Flowtech you always get
Local presence
We are represented in eight locations in Sweden, from Lund in the south to Skellefteå in the north. We also have offices in Denmark.
24/7 Service
We are available 24/7, all year round, with the aim of being faster, better and more engaged than our competitors.
Unique product range
At Colly Flowtech, we offer a unique product breadth in flow technology, with solutions customized for different sectors and industries.
40+ years of experience
With over 40 years of industry experience, we work in close collaboration with our customers and with a strong commitment.