Proclear GF - Glass microfiber-based liquid pre-filters

Related products

• 
  CIP and SIP compatible filters

  Propor SG - Sterile liquid filters

  PROPOR SG sterile grade filters are equipped with a microbially retentive polyethersulfone membrane that enables fast, reliable and cost-effective sterile filtration of pharmaceutical liquids.
• 
  Filter

  High Flow BIO-X - Sterile gas filter cartridge

  HIGH FLOW BIO-X sterile gas filters combine proven depth filter technology with a weighted design to achieve retention down to 0.01 μm in gas. Flow rates typically 2-3 times higher than membrane filters make the HIGH FLOW BIO-X a filter that can significantly reduce the number of cartridges used and installation size in the fermentation and food and beverage industries. The specially developed PTFE impregnation process provides increased strength and permanent hydrophobicity to the borosilicate-based microfiber media. This ensures excellent performance in applications such as sterile gas delivery in filling lines. High Flow BIO-X series are available in a variety of configurations. For further information, please refer to the technical data sheet of the product.
• 
  Filter

  HIGH FLOW TETPOR II - Sterile rated air and gas filters

  HIGH FLOW TETPOR II gas sterilization filters have been developed to take advantage of technological advances in PTFE membrane manufacturing. This new generation of filters sets the standard with an unbeatable combination of efficiency, flow rate and strength. HIGH FLOW TETPOR II is validated to provide sterilization-grade filtration performance according to ASTM 838 methodology for bacterial challenge with liquid. This ensures that the filter guarantees the sterility of your process even in the worst case. In such situations, the filter may be exposed to a larger amount of liquid as a result of a process problem. Furthermore, small changes in the structure of the hydrophobic PTFE material have resulted in a very robust product validated for 225 autoclave/steam sterilization cycles (up to 142°C [287°F]). The combination of non-woven support before the membrane and an expanded mesh layer after the membrane provides significant benefits. It provides increased protection and longer service life while not releasing fibers in the process. HIGH FLOW TETPOR II is suitable for all sterile gas applications, including fermentation inlet and outlet gas, venting, freeze dryers, autoclaving vacuum breaks and blow-fill-seal equipment. HIGH FLOW TETPOR II filter are available in a variety of configurations. For further information, please refer to the technical data sheet of the product.
• 
  CIP and SIP compatible filters

  TETPOR PLUS - Chemical-resistant fluoropolymer filters

  TETPOR PLUS filters are made entirely of fluoropolymers, making them highly resistant to a wide range of aggressive chemicals. TETPOR PLUS filter cartridges are specifically designed for the filtration of liquids and gases in the bulk pharmaceutical industry, the chemical industry and biopharmaceutical processes where particle separation, bioburden reduction and guaranteed sterility are required. The increased use of ozonation in the treatment of WFI systems has highlighted compatibility issues with vent filters based on standardized polypropylene components. The introduction of a fully validated TETPOR PLUS filter cartridge with sterilization-grade 0.2 μm membrane provides long-term and safe performance in these applications. It also has the added benefit that filter integrity can be verified by water ingress testing. The high pore volume of the single layer PTFE membrane ensures an excellent combination of flow rate and retention. TETPOR PLUS series are available in a variety of configurations. For further information, please refer to the technical data sheet of the product.