Pumps

Revolution is a new generation piston rotor pump with an innovative design that combines the advantages of piston rotor and lobe rotor pumps. The result is improved hygiene, self-draining function, front-mounted seals and high serviceability, together with gentle, self-priming and reversible operation with low noise and minimal pulsation. The pump is flush-proof and service-friendly with front-mounted seals and UH-free gearbox. It is prepared for flushed sealing as standard and can easily be retrofitted at low cost.

This centrifugal pump is part of a complete, modular range available in a total of 29 different sizes and is adapted for use in the food and pharmaceutical industries, ATEX-rated environments and other demanding environments. The design of the pump allows, for example, the motor to be replaced while the pump is installed in the piping system, without affecting its tightness. The pumps are equipped with extra internal bearings and minimal tolerances, contributing to a heavy-duty reliable design with higher efficiency and lower noise levels. A unique, self-draining and internally mounted seal provides longer life in applications such as WFI/PW, CIP and solvents. The pumps are service friendly. We provide spare parts both as loose parts and as preventive maintenance kits to facilitate maintenance and troubleshooting. Extensive documentation is available as an option, with certificates and tests to simplify validation and qualification in the food and pharmaceutical industries. There is also a wide range of options and material combinations, including vibration damping feet and ATEX approval. Other options include mobile units with frequency control, inducer for low NPSH, electropolishing and drainage capabilities and more.

Pompetravaini's new TCH series and derived series in the same family is a centrifugal pump developed according to ISO 5199 class II and dimensioned according to ISO 2858/DIN 24256. It provides an ideal product with great width and modularity adapted to the high requirements of the process, petrochemical and chemical industries in particular. These pumps are the result of Pompetravaini's continuous research and development. They are also based on the extensive experience acquired during many years of use of the previous MCU-CH series in countless installations and applications. Shaft seals single or double mechanical seal (ISO 3069 / UNI EN 12756) Cartridge seal and stuffing box seal in various designs. Pump and seal housings can be fitted with heating or cooling jackets as required. Handling of clean or slightly contaminated liquids, hot, acidic and caustic chemicals is important in several industries. This includes the chemical, petrochemical, pharmaceutical, food production, pulp and paper, steel and textile industries. From the TCH series are derived the TCT series - Vortex pumps, the TCA series - open impeller and the TCD series - Thermal oil pump; all designed for very specific pumping applications. All these series use several common components. Units up to 30 kW can be close coupled, with the addition of a lantern piece to B5 flange motors. This monoblock design provides alignment advantages, easy assembly and guarantee of perfect alignment, even after transportation.

Versamatic manufactures a complete line of air-operated diaphragm pumps for industrial applications. The pump is available in a wide range of materials and sizes and has been marketed exclusively by Dominator Pump since the early 1990s.

ALH is our flagship peristaltic pump, built for high pressure applications up to 15 bar, with 16 sizes up to 88 m3/h. Extremely robust, reliable and dependable ductile iron hose pump.

Eccentric screw pump in a wide range, developed for demanding applications in the process industry. Efficient product handling makes it ideal for use in paper and pulp production, the chemical industry, sludge handling and other demanding environments.

Self-priming centrifugal pump for applications in process, water/sewage treatment plants, fire/rescue authorities, municipalities, infrastructure/construction, etc. Available in several versions, both as a compact pump directly connected to the motor and as a stand-alone pump with base plate, shaft coupling and B3 motor.

Drum pump for sodium chloride, potassium hydrate, lye, ammonia solutions, formic acid and acetic acid. They can also handle hydrochloric acid, battery acid, ferric chloride, phosphoric acid, chromic acid, citric acid and similar substances. With electric motors 1 phase 230V or air motors. Motors and piping are suitable for Lutz®. All electric motors are supplied with built-in switch, overload protection, 5 m electrical cable with electrical plug. They can be supplied with or without low voltage protection and as an option with a speed regulator for variable flow.

Plastic diaphragm pump from Dominator Pump. Available in models P35P/D and P36P/D.

The TS series is a newly developed hygienic twin screw pump, designed for applications with high demands on gentle product handling, hygiene and serviceability. This innovative design and technical solution is highly efficient, pulsation-free and reversible. It is CIP/SIP compliant and made entirely of stainless steel, with all wetted parts in solid SS316L. The pump has Ultra Hygienic front-mounted seals and a unique Swedish-made modular sealing solution for high reliability and easy UH/FU. The pump's heavy-duty gearbox allows the pump to be speed-controlled and serve as a CIP distribution pump, which gives you great advantages in avoiding external CIP pumps, by-pass systems and valves. The TS pump is primarily designed for hygienic applications in the Food and Pharmaceutical industries, but with its many features and benefits, it is ideal for most other process industries. Requires extremely low NPSHr and handles product with admixture of air, particles and is self-priming. Handles low and high viscous product, CIP distribution and reversible flow in one pump. Fitted as standard with IEC standard motors for a wide flow range.

Pompetravaini TBH series self-priming liquid ring pumps use the side channel principle. The open star wheel is hydraulically balanced and enclosed between the suction and discharge port plates to form the pumping stage. The discharge stages are mounted in series to provide proportionally higher discharge pressure with smooth flow. For handling hazardous, toxic, odorous or polluting liquids and other applications where zero liquid leakage is desired, the TBK and TBAK magnetic drive pumps, based on the TBA and TBH series, are available. TBH pumps have extremely low NPSHr requirements and are particularly suitable for handling liquids near the vaporization pressure of the liquid, volatile liquids and other difficult applications. The design is especially suited to handling liquids with mixed gases and liquefied gases such as LPG. The TBH series pumps are suitable for handling clean, hot or cold, liquids, corrosive, in chemical, petrochemical, pharmaceutical, food industry etc. Applications; Removal of condensate and distilled liquid, solvents and liquefied gases, boiler feed water, handling of liquids from processes under vacuum, fire fighting systems and autoclaves, marine drinking and sanitation systems, high pressure flushing

The HD (Heavy Duty) series is a very robust gear pump designed for viscous media and demanding applications in the process industry. The pump is service-friendly and has a front and back pull-out design as well as an axially adjustable rotor, which enables easy maintenance and minimizes downtime.

Vingpump in acid-proof series with several models for small flows and high pressures, developed for safe dosing and transportation in the process and hygiene industry.

Highly hygienic lobe rotor pump of the latest generation with a wide range of options. Modular and service-friendly series with upgraded and maintenance-free gearbox.

The DESMI DSL, NSL and ESL series is a vertical in-line centrifugal pump in a space-saving design that can be easily installed in existing piping systems. The DSL/NSL/ESL series have high efficiency, low NPSH requirements, are easy to install and have low maintenance costs. DSL/NSL/ESL series in-line centrifugal pumps are widely used in various applications and markets. Easy installation and access for maintenance, monobloc design without alignment requirements - with or without ball bearings, or spacer coupling NSL is a radial split, single-stage centrifugal pump in in-line design with connecting flanges according to international standards. The pumps can handle electric motors with different international flange dimensions. The pump casings are fitted with replaceable sealing rings. The impeller has double-curved blades that ensure low NPSH values and high efficiency. The bearing unit is equipped with heavy-duty ball bearings; the smaller models have permanently lubricated ball bearings and the larger models have double ball bearings with grease nipples. Can be supplied with built-in vacuum pump for self-evacuating function. Typical applications and fluids are water - with or without additives, seawater, thin oils, diesel, gasoline, chemicals. Excellent for fuel depots, cooling water/media, circulation systems, alcohols and solvents

Pompetravaini TBA series self-priming liquid ring pumps use the side channel principle. The open star wheel is hydraulically balanced and enclosed between the suction and discharge port plates to form the pumping stage. The discharge stages are mounted in series to provide proportionally higher discharge pressure with smooth flow. For handling hazardous, toxic, odorous or polluting liquids and other applications where zero liquid leakage is desired, the TBK and TBAK magnetic drive pumps are available, based on the TBA and TBH series. TBA pumps have extremely low NPSHr requirements and are particularly suitable for handling liquids near the vapor formation pressure of the liquid, volatile liquids and other difficult applications. The design is especially suitable for handling liquids with mixed gases and liquefied gases such as LPG. The TBA series has the performance, design and operating point characteristics of the TBH series. The pump components are interchangeable, reducing the need for spare parts for both series. The TBA series pumps are suitable for handling clean, hot or cold, liquids, corrosive, in chemical, petrochemical, pharmaceutical, food industry etc. Applications; Removal of condensate and distilled liquid, solvents and liquefied gases, boiler feed water, handling of liquids from processes under vacuum, fire fighting systems and autoclaves, marine drinking and sanitation systems, high pressure flushing.