RCS® Rupture Disc

Reliable, accurate, easy to install and simple to retrofit into your current piping system – the RCS rupture disc is the clear choice for any gas-only application.

A reverse-acting, cross-scored rupture disc, the RCS provides high performance pressure relief for larger sizes than available with the HPX line.

Varumärke: Continental Disc Corporation

Begär offert

Produktöversikt

Features

High precision, optimum flow

We use high-precision manufacturing techniques to create slight indentations on the surface of the RCS dome to ensure it initiates reversal at exactly the specified burst pressure.

In addition, the RCS rupture disc’s cross-scored pattern provides a clean, consistent opening pattern and a non-fragmenting four-petal burst design for optimum flow.

Corrosion protection

Thicker rupture disc materials and optional fluoropolymer liners and coatings (for both vent and process sides) make the RCS highly resistant to corrosion. We also cross-score the vent side of the RCS to prevent process buildup or corrosion along the process side score lines.

Safety ratio

Should your RCS rupture disc be damaged during installation or handling, it will still provide pressure relief at or less than 1.5 times its rated (marked) burst pressure.

The RCS is an ideal choice for primary or secondary system-relief protection and provides an effective means of fugitive emission control when used to isolate a safety relief valve.

Optional features

The RCS is available to be cleaned for oxygen or chlorine service.

Specs

Nominal Size Range: 14″ – 32″ (350 mm – 800 mm)
Burst Pressure Range: 20 psig – 180 psig (1,38 barg – 12,4 barg)
Maximum Recommended Operating Ratio: 90% of the rupture disc’s rated (stamped) burst pressure.
Seating Configuration: Flat seat
Service: Gas
BDI Alarm System Compatible?: Yes
ASME Code Symbol Stamp Available?: Yes

Materials not indicated or shown may be available by special design.

Industry Applications

Chemical Processing
Our rupture discs are manufactured with chemical processing in mind – corrosion resistance, leak tightness, high accuracy and durability come standard.

Oil & Gas (Petrochemical)
The hydrocarbon industries require cost-effective system protection with a special focus on reducing fugitive emissions. Our catalog of configurations, materials, burst ratings and sizes make our rupture discs the right choice for these operations.

Pharmaceutical & Biotechnology
We focus on solutions to meet the stringent requirements of pharmaceutical processing – wherever perfectly hygienic facilities and hermetically sealed antiseptic systems are a must.

Certifikat & krav som produkten uppfyller

ASME, Section VIII, Division 1 Certification of Authorization

RTR (formerly GOST-R) Conformity Certification

Nedladdningsbart material

Installation guide for the MINTRX (DD) rupture disc in the MINTRX double-disc holder assembly

Engelska

CDC product selection guide

Svenska

Complete info and specs for CDC reverse-acting rupture discs and holders

Svenska

Relaterade produkter

REVERSE-ACTING Rupture Discs

SANITRX LPX Sanitary Rupture Disc

The pharmaceutical, biotech, food and beverage industries rely on the high-precision SANITRX rupture disc family – the perfect combination of industry-leading performance with ASME BPE, USP Class VI and 3A compliance. The SANITRX LPX rupture disc is a stainless steel, semicircular scored, reverse acting rupture disc designed for sanitary gas applications that require pressures below SANITRX HPX.
REVERSE-ACTING Rupture Discs

LOTRX® Rupture Disc

A breakthrough in rupture disc design: the LOTRX rupture disc. The LOTRX rupture disc has all the benefits of our scored, reverse-acting discs, and more — a failure-initiating indent to lower the pressure at which reversal occurs and a notched outlet ring to facilitate opening of the rupture disc along a precision semicircular score — making it the perfect solution for extremely low-pressure applications.
REVERSE-ACTING Rupture Discs

STAR X™ Rupture Disc

The STAR X rupture disc has low burst pressures and includes a wide range of construction materials as well as our precision failure-initiating indent to precisely control disc buckling at exact pressures. The STAR X covers low burst pressure ratings in the TRX line of scored, reverse-acting rupture discs. Learn more about the ULTRX, for high-pressure applications, or the MINTRX, for mid- to low-pressure applications. In addition, we also offer our HPX rupture discs.
REVERSE-ACTING Rupture Discs

ULTRX™ Rupture Disc

Precision failure-initiating indent, high-precision scoring and a variety of construction materials make the ULTRX rupture disc a versatile and economical overpressure protection option. The ULTRX features the highest burst pressure rating in the TRX line of scored, reverse-acting rupture discs. Learn more about the STAR X, for ultra low-pressure applications, or the MINTRX, for mid- to low-pressure applications. Alternatively, you can see other product varieties in our popular line of HPX rupture discs.