Control Top T.VIS® V-1 / V-20

The T.VIS® V-1 / V-20 is an electrical position indicator with feedback system and optionally integrated solenoid valves for linear process valves with a stroke up to 1.18″. Thanks to its modular design, the T.VIS® V-1 / V-20 can be customized to the customer’s specific requirements: without solenoid valve, with one solenoid valve (for single-acting actuators – with spring, only V-1), with two solenoid valves (for double-acting actuators – without spring, only V-1)

Varumärke: GEA

Begär offert

Produktöversikt

Advantages of the T.VIS V-1 and V-20

Automated end position programming
Easy and safe operation without tools, no need to open the module
Modular design
Manual operation of the process valve is possible
OPEN and CLOSED feedback signals as standard
Accuracies can be set
Option: AS Interface and DeviceNet (T.VIS® V-1 / V-20)

Designated Use

The programmable Control Module T.VIS® V-1 (Tuchenhagen Valve Information System) is used for the pneumatic and/or electrical connection of VESTA valves (stroke < 10 mm), the programmable Control Module T.VIS® V-20  for the electrical connection of VESTA valves (stroke max. 30 mm)

The Control Module T.VIS® V-1 is available

as electrical position indicator without solenoid valve and
as control head with solenoid valve.

The Control Module T.VIS® V-20 is a electrical position indicator without solenoid valve.

The Control Module T.VIS® V-1 and T.VIS® V-20 consist of a base element and a cap.

The base element incorporates an integrated path measurement and the cap the necessary control electronics.

When the control module  T.VIS® V-1 is used as a control head, a solenoid valve is integrated in the special base and the air connections are accessible from the outside of the base. An external hose connection is provided for supplying the process valve with control air.

Concerning the position indicator, the pneumatic valve actuation is assumed by a solenoid valve provided by the customer, e.g. solenoid valve terminal.

For pneumatic valve actuation of T.VIS® V-20 , the actuator must be connected to a solenoid valve (solenoid valve cluster) provided by the customer.

Function

The function of the control module T.VIS® V-1 and T.VIS® V-20 is based on an microprocessor integrated in the cap, containing the software for operation, visualisation as well as intelligent valve position detection, controlling and evaluation. A potentiometer or a position sensor installed in the positioner ascertains the valve stroke and transmits the data to the microprocessor.

After programming, the position indicator indicates by colored LEDs under its illuminated cap the status of the local process valve visible from afar.

The feedback of the positions OPEN / CLOSED as well as error messages are made available depending on the communication type the user selected as a 24 V DC switching output or per AS interface data bit or DeviceNet data bit.

During programming, the process valve is moved into the position OPEN / CLOSED by activating an external solenoid valve in order to define the actuated positions of the valve.

In case of the control head T.VIS V-1 signalling takes place in the same way as described for the position indicator, however, the solenoid valve integrated in the base element is activated depending on the control signals. These control signals are emitted automatically during programming of the actuated positions using the microprocessor or in the operating mode via the PLC of the user. In the manual mode, the solenoid valve may be activated via keys which make the process valve move into the position OPEN or CLOSED.

The automatic programming of the actuated positions can in both versions be activated either by using the keys in the cap or by an external control signal (programming input).

The keys in the cap serve in addition for customer specific parameter setting of the control module.

Nedladdningsbart material

GEA Valve Automation – Catalog

Brochure

Engelska

Relaterade produkter

GEA control tops

Proximity Switch Holders

Connection 0, INA, LAT
GEA control tops

Controll Top T.VIS® Q-15

Safe control and monitoring of overflow valves in breweries, dairies, fruit juice production plants and in the pharmaceutical industry. The T.VIS® Q-15 used to control and monitor overflow valves of the VARIVENT Q series can optionally be equipped with solenoid valves. The proximity switch is mounted in the valve lantern as standard. In addition to the safe control and monitoring of Q-valve-specific functions, the T.VIS® Q-15 offers the possibility to mount the control top directly on the Q-valve.
GEA control tops

LEFF® Function – Low Emission Flip-Flop

Reducing water consumption is a key priority in sustainable production. GEA’s electronic LEFF function can save more than 90% water and cleaning agents during valve seat cleaning.
GEA control tops

Control Top T.VIS® A-15

Development has focussed on the requirements and necessities of our customers from the fluid-processing industry. In addition to safe control and monitoring of all functions of the process valves in breweries, dairies, plants for manufacturing fruit juices as well as pharmaceuticals, the T.VIS® A-15 offers significant advantages that are directly reflected in lower total cost of ownership.