Proximity Switch Holders
Connection 0, INA, LAT
Feedback in the lantern is preferably used wherever control and feedback systems cannot be employed (e.g. in valves with manual actuator or two-position-stop (cylinder)).
Connection 0 can be used as an alternative to feedback systems if no feedback sensors are wanted above the actuator. Connection 0 is available in a metric and inch variant.
The proximity switch holder M12×1 (INA) makes it possible to use feedback sensors above the actuator. The proximity switch holder has prepared M12×1 holes which allow the sensors to be set optimally. A direct connection to the controller provides the feedback on the valve position.
Relaterade produkter
-
IO-Link for the T.VIS® A-15
IO-Link is the first globally standardized IO technology (IEC 61131-9) to communicate with sensors and actuators. The powerful point-to-point communication is based on the long-known 3-wire sensor and actuator connection without any additional requirements for the cable material. Therefore, IO-Link is not a fieldbus, but the evolutionary advancement of the existing and proven connection technology for sensors, actuators and thus also for control tops of the latest generation. -
LEFF® Function – Low Emission Flip-Flop
Reducing water consumption is a key priority in sustainable production. GEA’s electronic LEFF function can save more than 90% water and cleaning agents during valve seat cleaning. -
Controll Top T.VIS® Q-15
Safe control and monitoring of overflow valves in breweries, dairies, fruit juice production plants and in the pharmaceutical industry. The T.VIS® Q-15 used to control and monitor overflow valves of the VARIVENT Q series can optionally be equipped with solenoid valves. The proximity switch is mounted in the valve lantern as standard. In addition to the safe control and monitoring of Q-valve-specific functions, the T.VIS® Q-15 offers the possibility to mount the control top directly on the Q-valve. -
Control Top T.VIS® A-15
Development has focussed on the requirements and necessities of our customers from the fluid-processing industry. In addition to safe control and monitoring of all functions of the process valves in breweries, dairies, plants for manufacturing fruit juices as well as pharmaceuticals, the T.VIS® A-15 offers significant advantages that are directly reflected in lower total cost of ownership.
"*" indicates required fields
Vill du hitta kontaktuppgifter till en specifik person eller kontor?
Här hittar du alla våra kontaktuppgifter.
Med Colly Flowtech får du alltid
Lokal närvaro
Vi är representerade på åtta orter i Sverige, från Lund i söder till Skellefteå i norr. Vi har dessutom kontor i Danmark.
24/7 Service
Vi är tillgängliga dygnet runt, året om, med målet att vara snabbare, bättre och mer engagerade än våra konkurrenter.
Unik produktbredd
På Colly Flowtech erbjuder vi en unik produktbredd inom flödesteknik, med lösningar anpassade för olika branscher och industrier.
40+ års erfarenhet
Med över 40 års branscherfarenhet arbetar vi i nära samarbete med våra kunder och med ett starkt engagemang.