TETPOR LIQUID - Chemical resistant sterile liquid filters
TETPOR LIQUID filters are particularly suitable for sterilizing and separating particles from aggressive chemicals (including acids, bases and solvents) in a range of critical process industries.
The superior performance, strength and durability of TETPOR LIQUID filters comes from the use of a single-layer, high security PTFE membrane with high dirt holding capacity thanks to its large pore volume. This results in low pressure drops and long service life.
High flow rates are achieved through optimized pleat density and the superior structural design of TETPOR LIQUID filters.
TETPOR LIQUID series are available in a variety of configurations. For further information, please refer to the technical data sheet of the product.
Brand:
Parker Hannifin
Request offer
Product Overview
Features and benefits
- Superior chemical resistance of PTFE membrane combined with polypropylene components
- Integrity tested before delivery
- Validated according to current ASTM F838 methodology
- Extensive range of end cap configurations for easy customization
Related knowledge articles
Related products
-
Propor SG - Sterile liquid filters
PROPOR SG sterile grade filters are equipped with a microbially retentive polyethersulfone membrane that enables fast, reliable and cost-effective sterile filtration of pharmaceutical liquids. -
TETPOR PLUS - Chemical-resistant fluoropolymer filters
TETPOR PLUS filters are made entirely of fluoropolymers, making them highly resistant to a wide range of aggressive chemicals. TETPOR PLUS filter cartridges are specifically designed for the filtration of liquids and gases in the bulk pharmaceutical industry, the chemical industry and biopharmaceutical processes where particle separation, bioburden reduction and guaranteed sterility are required. The increased use of ozonation in the treatment of WFI systems has highlighted compatibility issues with vent filters based on standardized polypropylene components. The introduction of a fully validated TETPOR PLUS filter cartridge with sterilization-grade 0.2 μm membrane provides long-term and safe performance in these applications. It also has the added benefit that filter integrity can be verified by water ingress testing. The high pore volume of the single layer PTFE membrane ensures an excellent combination of flow rate and retention. TETPOR PLUS series are available in a variety of configurations. For further information, please refer to the technical data sheet of the product. -
Propor MR - Sterile liquid filters for the removal of mycoplasma
PROPOR MR filters are specifically designed for the rapid, efficient and cost-effective removal of mycoplasma from cell culture media in the biopharmaceutical industry. The highly retentive PES membrane with a nominal pore size of 0.1 μm is validated against the industry standard Brevundimonas diminuta as well as Acholeplasma laidlawii, a common mycoplasma species in contaminated cell cultures. An asymmetrically integrated membrane prefilter gives PROPOR MR the optimal membrane configuration for maximum capacity and high flow rates. Fast process times minimize the risk of contamination while ensuring maximum protection against mycoplasma. PROPOR MR series are available in a variety of configurations. For further information, please refer to the technical data sheet of the product. -
High Flow BIO-X - Sterile gas filter cartridge
HIGH FLOW BIO-X sterile gas filters combine proven depth filter technology with a weighted design to achieve retention down to 0.01 μm in gas. Flow rates typically 2-3 times higher than membrane filters make the HIGH FLOW BIO-X a filter that can significantly reduce the number of cartridges used and installation size in the fermentation and food and beverage industries. The specially developed PTFE impregnation process provides increased strength and permanent hydrophobicity to the borosilicate-based microfiber media. This ensures excellent performance in applications such as sterile gas delivery in filling lines. High Flow BIO-X series are available in a variety of configurations. For further information, please refer to the technical data sheet of the product.
"*"indicates required fields
Do you have questions about filters? Do not hesitate to contact me
Patrik Andersson
Product Specialist - Filter
Phone:
+46 76 492 03 89
Email:
patrik.andersson@colly.se
Do you want to find contact details for a specific person or office?
Here you will find all our contact details.
With Colly Flowtech you always get
