Pumps
Our Subcategories:
Amount of products: 109
-
Magnetic drive pumpsTBK/TBAK series - Magnetic drive centrifugal / side channel pump
The TBK/TBAK series is a further development of the TBH/TBA series for applications where magnetic drive is required for the safe handling of hazardous liquids. It offers the same hydraulic characteristics, with high efficiency at low flow rates and high pressures. The pumps have very low NPSH requirements and are therefore particularly suitable for fluids near their boiling point and for operation under severe conditions. Their design allows for the pumping of fluids containing gas, particularly liquefied gases.Pompetravaini -
Magnetic drive pumpsTCK series - Magnetic drive chemistry pump ISO 2858
The TCK series is a magnetically driven chemical-grade pump and a single-stage centrifugal pump with a closed impeller, sized in accordance with ISO 2858 and ISO 5199. The series is derived from the TCH series and is constructed with high-quality components for safe and leak-free operation.Pompetravaini -
Centrifugal pumpsTCHM/TCTM series - Chemical norm centrifugal pumps in compact design ISO 2858
The TCHM and TCTM series from Pompetravaini are robust and reliable monoblock pumps based on the TCH series. The pumps are designed for the chemical industry and general industry, where high efficiency, operational reliability, and a competitive total cost of ownership are key requirements. The series is available with a closed impeller (TCHM) or a vortex impeller (TCTM), making the pumps suitable for both clean and contaminated liquids. Typical applications include the chemical industry, the petrochemical industry, pharmaceuticals, food processing, pulp and paper, and general industry.Pompetravaini -
Centrifugal pumpsTCT series - Chemical norm centrifugal pumps with vortex impellers ISO 2858
The TCT series is a centrifugal pump with an open vortex impeller, designed for handling liquids containing suspended solids or fibers, as well as slurry and viscous media. The pump is based on the design of the TCH series and uses several common components, which simplifies maintenance and reduces the need for spare parts. The vortex principle ensures that the fluid is handled by the swirling motion generated by the impeller, resulting in gentle handling of contaminated and particulate-laden media.Pompetravaini -
Centrifugal pumpsTCA series - Chemical norm centrifugal pumps open impeller ISO 2858
The TCA series is a chemically rated centrifugal pump with a fully open impeller, designed for handling abrasive liquids, suspensions, and media containing solid particles. The impeller rotates between two replaceable wear plates, providing excellent wear resistance and easy maintenance in the event of prolonged wear. The pump is based on the TCH series design and uses several common components, which simplifies maintenance and reduces the need for spare parts. The TCA series is suitable for demanding industrial applications where an open impeller and robust construction are required.Pompetravaini -
Hose pumpsHoses for hose pumps
Albins tubing is durable, high-quality tubing designed for peristaltic pumps. It is available in a variety of sizes and materials to fit most major brands, such as Bredel, Verder, and Blackmer.Albin Pump -
Air operated diaphram pumps (AODD)Pulsation dampeners for diaphragm pumps
Versamatic pulsation dampers for diaphragm pumps reduce unwanted pulsation and provide a more consistent discharge flow. The result is more consistent pressure, less system vibration, and lower noise levels.Versamatic -
WebshopAir operated diaphram pumps (AODD)Dominator soft-start valve for diaphragm pumps
Art.nr: DOMINATOR Soft start valveThe Dominator soft-start valve is an accessory for air-operated diaphragm pumps that provides the pump with a smooth and controlled acceleration. The valve reduces shock loads on the diaphragm and other moving parts. A soft start also reduces the risk of vibration damage to piping systems and their fittings. The risk of cavitation in the pump is also reduced with a softer start, especially when pumping high-viscosity products.Dominator Pump4 variaties -
Gear pumpsCHD Series - Gear Pump for Chocolate
The CHD series is a gear pump designed for chocolate products, developed to ensure reliable and leak-free pumping in demanding food applications.Rotan (DESMI) -
Gear pumpsPD Series (Pedro Duty) - Gear Pump for the Petrochemical Industry
The PD Series (Pedro Duty) is a gear pump designed for the refining and petrochemical industries, developed in accordance with the requirements of API 676, 2nd edition. All pumps are hydrostatically and dynamically tested at the factory and are supplied with an individual test certificate. Upon request, the pump can be supplied with NDT testing, welding documentation, painting documentation, and a 3.1B certificate.Rotan (DESMI) -
Gear pumpsCD Series (Chemical Duty) - Gear Pump for the Chemical Industry
The CD Series (Chemical Duty) is a gear pump made of acid-resistant AISI 316L steel for demanding and corrosive applications in the chemical, food, and pharmaceutical industries.Rotan (DESMI) -
Gear pumpsGP Series - Gear Pump for OEM Applications
The GP series is a compact gear pump for OEM applications, manufactured from cast iron and equipped with an IEC motor. The pump offers excellent suction capacity and a robust, well-supported design with standard seals in accordance with EN 12756.Rotan (DESMI) -
Piston pumpsPA series - Hygienic piston pump
The PA Series is a hygienic piston pump from CSF designed for handling high-viscosity products in the food, beverage, pharmaceutical, and process industries. The pump is suitable for transferring, dosing, spraying, and transporting liquids where high pressure and adjustable flow are required. The pumps are designed for a wide range of applications involving high-viscosity products. Designed to transfer, dispense, spray, and transport liquids, with adjustable flow rates as needed. Thanks to the air motor, the pumps can be used in potentially explosive atmospheres and are available in ATEX-certified versions upon request. They feature seals selected from a wide range of materials and profiles, designed and tested for numerous applications.CSF -
Hose pumpsAlbin ALHP Series – Pulsation Dampers for Peristaltic Pumps
The Albin ALHP is an inline pulsation damper for peristaltic pumps that reduces vibrations and fluid surges in piping. It helps ensure a more consistent flow and extends the service life of the tubing. The pulsation is caused by the operating principle of the peristaltic pump. The rubber hose in the pulsation damper adjusts its volume to compensate for the pulsation and provide a steady flow to the outlet line. This is achieved using a thick-walled, reinforced rubber hose mounted in a cylindrical carbon steel pressure vessel. The hose is surrounded by compressed air (nitrogen if the unit is ATEX-certified).Albin Pump -
Hose pumpsAlbin ALX150 Series - Peristaltic Hose Pump for High Flow Rates
The Albin ALX150 series is a peristaltic hose pump designed for high flow rates of highly viscous and abrasive liquids. The pump is a robust alternative to slurry centrifugal pumps in applications involving abrasive, particulate-laden, or shear-sensitive media.Albin Pump -
Hose pumpsAlbin ALH Series CIP - Peristaltic Hose Pump with CIP Cleaning
The Albin ALH Series CIP is a peristaltic hose pump featuring a patented solution for efficient CIP cleaning in the food, cosmetics, and pharmaceutical industries. The pump’s design allows the hose to be separated from the pressure rollers, enabling cleaning with external CIP systems without the need for the pump to rotate.Albin Pump
Wide range of industrial pumps
Distributor for the market's leading pump manufacturers
Our pump suppliers are established, reputable and internationally active. What they all have in common is high quality standards and continuous development.
Service, maintenance and training of pumps
The choice to have our own service specialists was easy. With specialized experience in service and maintenance of pumps and pumping equipment, we belong to the elite in our field. We have workshops in three locations in Sweden and in addition, most of our pump salespeople have a background in pump service, which means that we are well prepared when you need help to remedy problems on site.
Read more about our pump service here
Spare parts for pumps
We offer a wide range of spare parts and wear parts for several brands of pumps and valves. Our range includes mechanical seals, hoses for hose pumps, rotors and stators for progressive cavity pumps, as well as diaphragms and valves for diaphragm pumps, and more.
Find out more about our spare parts
Own production of diaphragm pumps
Since its inception in 1981, Colly Flowtech, with its own production of diaphragm pumps in Jönköping, has grown to become the market leader in several segments in Sweden.
Our production in Jönköping is the heart of the business, with over 150 pumps always in stock to meet customer needs.
Do you want to find contact details for a specific person or office?
Here you will find all our contact details.