CLEAN-SWEEP® Assembly

Keep your rupture disc clean, accurate and operational with the CLEAN-SWEEP Assembly. Designed for viscous media processes, the CLEAN-SWEEP Assembly significantly reduces dead space in pipe-tee rupture disc assemblies, eliminating product buildup and preventing interference or excessive overpressure.

This holder is an ideal replacement for rupture disc assemblies installed off the leg of a pipe tee where product buildup could affect the proper operation of the rupture disc. With the CLEAN-SWEEP Assembly installed, the rupture disc mounts directly adjacent to the process flow.

Brand: Continental Disc Corporation

Request offer

Product Overview

Features

For many years, pipe tees were used in process lines with the rupture disc assembly installed off the leg of the tee. However, viscous product buildup could affect the proper operation and accuracy of the rupture disc.

The CLEAN-SWEEP Assembly eliminates the dead space in pipe-tee assemblies, as well as the pressure, temperature and material availability limitations caused by older, diaphragm valve body-based designs.

With the CLEAN-SWEEP, the rupture disc mounts directly on the body casting, adjacent to the process flow. It requires fewer sealed joints and greatly reduces the possibility of product buildup or dead space under the rupture disc.

Designed for operating pressures up to 1,440 psig (99.3 barg), the CLEAN-SWEEP Assembly is custom-machined to bolting classes of ASME, DIN, JIS or as specified by the customer. Alignment pins in the assembly inlet provide correct rupture disc orientation during installation. Once installed, the 3-Dimensional Flow Direction Tag, which is permanently attached to the rupture disc, is a visual reference that the rupture disc will discharge in the intended flow direction.

The CLEAN-SWEEP Assembly is designed to house either a Composite (CF) or MICRO X (CF) Rupture Disc, both of which have a flat seat configuration.

Specs

Nominal Size Range: 1″ - 6″ (25 mm - 150 mm)
Burst Pressure Range: 3 psig - 1,440 psig (0.207 barg - 99.3 barg)
Recommended Operating Ratio: N/A
Seating Configuration: Flat seat
Service: Viscous media
BDI Alarm System Compatible? Yes
ASME Code Symbol Stamp Available?: Yes

Materials not indicated or shown may be available by special design.

Industry Applications

Chemical Processing
Our rupture disks are manufactured with chemical processing in mind - corrosion resistance, leak tightness, high accuracy and durability come standard.

Downloadable material

CDC product selection guide

Brochure

English

Complete info and specs for CLEAN-SWEEP

Brochure

English

Related products

Rupture Disc Holders

Union Holder Assembly

Our line of Union holder assemblies provides flexibility in tight piping configurations. These precisely built holders combine remarkable ease of installation with high-pressure ratings in pipe sizes of 2″ (50mm) or less. The Union holder assembly works with standard- or composite-type rupture disks. SRA Union and Union-type holders are available for pressure ranges up to 6,000 psig, depending on disc size and type.
Rupture Disc Holders

Sanitary Rupture Disc Holder Fitting Assembly

Where product purity and corrosion resistance are critical, use our Sanitary Rupture Disc Holder Assembly. Quick-release and easy to change, this fitting assembly is trusted in dairy, pharmaceutical, food processing, canning, cosmetic and chemical industries.
Rupture Disc Holders

Double-Disc Assembly

Use a double-disc assembly to simplify your piping arrangements, eliminate back pressure, detect leaks or create an actuated rapid-opening system. Three holder components (inlet, mid-flange and outlet piece) and two rupture discs make up the double-disc assembly. The first rupture disc fits between the inlet and the mid-flange, and the second goes between the mid-flange and outlet.
Rupture Disc Holders

Screw-Type and Tite-Seal Rupture Disc Holder Assemblies

Give your miniature pressurized systems dependable, instantaneous overpressure relief with the Screw-Type rupture disc holder and the Tite-Seal assembly - customized for small systems, such as air conditioning systems, refrigeration units, hydraulic accumulators, gas cylinders, portable compressed-air systems and laboratory equipment. Screw-Type and Tite-Seal assemblies are available with a variety of inlet and outlet connections to accommodate various applications.