Skip to content

1/2

VARIVENT® Mixproof Shut-off Valve for CIP and Gas Blocks

VARIVENT® mixproof valves, types C and K, are used for mixproof separation of incompatible products at pipe connections in CIP systems or gas blocks.

GEA
Request offer
Product Overview
Function

When the valve is closed (unoperated position), there are always two seals between the separate pipelines. If one seal is defective, the resulting leak will be directed through the leak outlet to the outside, without mixing with the product in the other pipe.

Examples of Applications

VARIVENT® Type C double-seal valves and Type K double-seat valves are primarily used in applications where hygiene requirements are not critical, such as in CIP systems and gas blocks (breweries).

Valve Types

Valve Type K is a typical double-seat valve with two independent valve discs, on which the two seals are located.

Valve Type C, on the other hand, is a double-seal valve in which the two seals—with the leakage chamber between them—are integrated into a single valve disc.

In both designs, the two seals prevent the product line from mixing with a line containing a cleaning medium.

Sizes
Double-seal valves, type C valves Double-seat valves, type K
DN 25 - DN 150 DN 25 - DN 150
OD 1″ - OD 6″ OD 1″ - OD 6″
IPS 2″ - IPS 6″
Valve Selection Chart: Mixproof Shut-off Valves
Application Sealing Feature Type
Product Range Axial Sealing (Switching Leakages) Modular System Double-seat Valve, Type D
Product Range Axial Sealing (Switching Leakages) With Water Hammer Safety Double-seat Valve with Balancer, Type B
Product Range Radial Sealing With Water Hammer Safety Radial Sealing Double-seat Valve, Type R
Product Range Axial Sealing (Switching Leakages) Viscous Products or Products with large Particles Double-seat Long-stroke Valve, Type D_/V
Product Range, piggable Radial Sealing Pigging Pipe
Top of the page
Piggable Double-seat Valve Upside Down, Type L_H
Product Range, piggable Radial Sealing Pigging Pipe Bottom Piggable Double-seat Valve Upright, Type L_S
Gas Blocks &
CIP Systems
Modular System Double-seal Valve, Type C
Gas Blocks &
CIP Systems
Modular System Double-seat Valve, Type K
Cleaning the Leak Chamber

Type C Double-Sealed Valve

In the standard configuration, two flush valves are connected to the leakage chamber between the two valve disc seals.

One of the flush valves is always used as a leak outlet, while the other flush valve is connected to the cleaning medium via an olive fitting to clean the leak chamber.

This requires a supply valve connected to the atmosphere, which supplies the cleaning medium to the flush valve as needed.

Cleaning takes place while the main valve is closed, which means that the sealing surfaces of the valve disc seals that face each other do not come into contact with the cleaning medium.

Type K Double-Seat Valve

The Type K double-seat valve has neither an external connection for spray cleaning nor a lifting actuator. The leakage chamber is flushed with the fluid that escapes from the leakage chamber as a result of the switching leakage during the main stroke.

For this reason, the valve is not suitable for use in hygienic areas.

The advantages of Type K valves are the slightly higher protection against water hammer that can occur in the lower section of the pipeline, as well as a wider selection of available valve body combinations.

Mixproof Valves VARIVENT® K
Mixproof Valves VARIVENT® K
Technical Specifications

Types C & K. For more information, see the catalog.

Technical Data of the Standard Version

Type C Type K
Material in contact with the product 1.4404 / AISI 316 L
Material not in contact with the product 1.4301 / AISI 304
Seal material in contact with the product EPDM, FKM, HNBR
Ambient temperature 0 to 45 °C
Air supply pressure 6 bar (87 psi)
Product pressure 5 bar (73 psi)
Surface in contact with the product Ra ≤ 0.8 μm DN, OD Ra ≤ 0.8 µm
IPS Ra ≤ 1.2 µm
External housing surface Matte blasted
Control and feedback system Connection 0 (without control top)
Actuator type Pneumatic actuator air / spring
Connection fittings Welding end
Identification Adhesive ID tag
Valve seat version Fixed vertical port Clamped or welded seat ring
Certificates EHEDG, CE A3, CE
Downloadable material
EN Information leaflet - Sealing set Double-Seal Valve Type C
Product Information
-
English
EN Information leaflet - Sealing set Mixproof Valve Type K
Product Information
-
English
EN Operating instruction - GEA VARIVENT Double seal valve type C
Operating Instruction
-
English
EN Operating Instructions - VARIVENT Mixproof Valve Type K
Operating Instruction
-
English

Do you have questions or want to place an order?

"*"indicates required fields

This field is for validation purposes and should be left unchanged.

Do you want to find contact details for a specific person or office?

Here you will find all our contact details.

With Colly Flowtech you always get

Service

Local presence

With ten offices in Sweden and one in Denmark, we can offer local support and service close to our customers, with fast help, high availability and personal expertise.

See our offices
A reliable supplier

A supplier you can trust

With a customer rating of 4.45 out of 5 and strong NPS results, we have clear evidence that our customers appreciate our commitment, personal service and focus on quality.

Read more about us
Unique product range

Unique product range

At Colly Flowtech, we offer a unique product breadth in flow technology, with solutions customized for different sectors and industries.

Explore our products
Customers

40+ years of experience

With over 40 years of industry experience and deep expertise, we help our customers find the right solution, with close collaboration and great commitment.

Read more about us