Pompetravaini

Pompetravaini's new TCH series and derived series in the same family is a centrifugal pump developed according to ISO 5199 class II and dimensioned according to ISO 2858/DIN 24256. It provides an ideal product with great width and modularity adapted to the high requirements of the process, petrochemical and chemical industries in particular. These pumps are the result of Pompetravaini's continuous research and development. They are also based on the extensive experience acquired during many years of use of the previous MCU-CH series in countless installations and applications. Shaft seals single or double mechanical seal (ISO 3069 / UNI EN 12756) Cartridge seal and stuffing box seal in various designs. Pump and seal housings can be fitted with heating or cooling jackets as required. Handling of clean or slightly contaminated liquids, hot, acidic and caustic chemicals is important in several industries. This includes the chemical, petrochemical, pharmaceutical, food production, pulp and paper, steel and textile industries. From the TCH series are derived the TCT series - Vortex pumps, the TCA series - open impeller and the TCD series - Thermal oil pump; all designed for very specific pumping applications. All these series use several common components. Units up to 30 kW can be close coupled, with the addition of a lantern piece to B5 flange motors. This monoblock design provides alignment advantages, easy assembly and guarantee of perfect alignment, even after transportation.

Pompetravaini TBH series self-priming liquid ring pumps use the side channel principle. The open star wheel is hydraulically balanced and enclosed between the suction and discharge port plates to form the pumping stage. The discharge stages are mounted in series to provide proportionally higher discharge pressure with smooth flow. For handling hazardous, toxic, odorous or polluting liquids and other applications where zero liquid leakage is desired, the TBK and TBAK magnetic drive pumps, based on the TBA and TBH series, are available. TBH pumps have extremely low NPSHr requirements and are particularly suitable for handling liquids near the vaporization pressure of the liquid, volatile liquids and other difficult applications. The design is especially suited to handling liquids with mixed gases and liquefied gases such as LPG. The TBH series pumps are suitable for handling clean, hot or cold, liquids, corrosive, in chemical, petrochemical, pharmaceutical, food industry etc. Applications; Removal of condensate and distilled liquid, solvents and liquefied gases, boiler feed water, handling of liquids from processes under vacuum, fire fighting systems and autoclaves, marine drinking and sanitation systems, high pressure flushing

Pompetravaini TBA series self-priming liquid ring pumps use the side channel principle. The open star wheel is hydraulically balanced and enclosed between the suction and discharge port plates to form the pumping stage. The discharge stages are mounted in series to provide proportionally higher discharge pressure with smooth flow. For handling hazardous, toxic, odorous or polluting liquids and other applications where zero liquid leakage is desired, the TBK and TBAK magnetic drive pumps are available, based on the TBA and TBH series. TBA pumps have extremely low NPSHr requirements and are particularly suitable for handling liquids near the vapor formation pressure of the liquid, volatile liquids and other difficult applications. The design is especially suitable for handling liquids with mixed gases and liquefied gases such as LPG. The TBA series has the performance, design and operating point characteristics of the TBH series. The pump components are interchangeable, reducing the need for spare parts for both series. The TBA series pumps are suitable for handling clean, hot or cold, liquids, corrosive, in chemical, petrochemical, pharmaceutical, food industry etc. Applications; Removal of condensate and distilled liquid, solvents and liquefied gases, boiler feed water, handling of liquids from processes under vacuum, fire fighting systems and autoclaves, marine drinking and sanitation systems, high pressure flushing.

TCD centrifugal pump for thermal oil. The TCD pump series is specially designed to handle thermal fluids up to 320˚C without special cooling systems. In the active cooling version "XT" it is possible to pump diathermic fluids up to a temperature of 365 °C. A special thermal barrier chamber, located between the pump casing and the impeller, blocks the heat from the pumped product. The designers have designed the bearing with cooling fins to effectively dissipate the heat from the pump casing. This design allows the safe use of a standard, simple mechanical seal. The pump shaft is supported by oversized C3 series ball bearings and is oil lubricated. The pump casing and impeller are the same as the other pumps in the two smallest models of the TCH series. Pump dimensions and characteristics are in accordance with ISO 2858/DIN 24256 and are the same as for the corresponding TCH series models. The TCD/SP pump range has been specifically designed to handle vegetable oils. The design varies from the standard TCD series at the mechanical seal; An additional chamber has been added behind the mechanical seal. This chamber should be connected to a container containing oil compatible with the pumped liquid. This device avoids that in case of seal failure, the air can enter the pump and oxidize the oil or that oil from the bearing housing enters the pump housing or vice versa.

Colly Flowtech can offer complete, customized vacuum/compressor systems from Pompetravaini

TRVX & TRMX series liquid ring vacuum pumps with an innovative design and high efficiency. Designed for the process and hygiene industry for flows up to 2000 m3/h and vacuum to 33 mbar. Newly designed TRMX monobloc single-stage liquid ring vacuum pump for low, medium and high vacuum. The TRMX series has taken all the advantages of the TRVX series and changed the hydraulic profile design making it an economical pump with outstanding performance and reliability. The new hydraulic profile design allows a performance increase of between 10 % and 20 % compared to previous series. Compared to the previous TRMB series, the TRMX 10 % is lighter. The size is 10-20% smaller. These two features allow for easier and cheaper installations. Maximum flexibility for handling the sealing fluid. Under normal conditions, the new TRMX series requires up to 40 % less sealing fluid flow compared to the previous TRMB series, ensuring a great saving in operating cost.

The TRH, TRS and TRV series is a wide and complete range of oil-free double and single-stage liquid ring vacuum pumps for the process and hygiene industries...

The TBK/TBAK is an evolution of the standard TBH/TBA model where safety requires magnetic operation to handle and secure hazardous fluids. It has the same hydraulic characteristics with its high efficiency at low flows with high pressures. These pumps reach a very low NPSH value making them particularly suitable for pumping liquids close to boiling point and in severe conditions. The special design ensures the pumping of liquids containing gases and in particular liquefied gases.

Magnetic drive single-stage centrifugal pump with closed impeller, sized according to ISO 2858 and ISO 5199 standards and derived from the TCH series. The pump has an innovative design with high quality components.

TCHM and TCTM series of Pompetravaini are of the highest quality with high efficiency and attractive price to chemical industry and industry in general. These robust and reliable pumps are based on the TCH series. They are manufactured in accordance with ISO standards 2858 and 5199. They are available in combination in simple monobloc assembly. Equipped with standard IEC B5 motors, allowing cost savings and better availability. The motors are directly connected to the pump without the need for flexible couplings and require no alignment. Perfect alignment is guaranteed, resulting in lower maintenance costs and longer service life. An integrated shaft bearing in the intermediate section reduces axial and radial loads on the electric motor, resulting in less wear on rotating components and increasing pump reliability and durability. High hydraulic efficiency and effectiveness and low NPSH requirements. The impeller can be of a closed (TCHM) or Vortex (TCTM) type allowing pumping of clean or contaminated fluids, giving wide use of these pumps. Handling of clean or contaminated liquids in chemical, petrochemical, pharmaceutical, food, pulp and paper and general industries.

Centrifugal pump with open vortex impeller. Suitable for handling liquids with suspended solids or fibers as well as muddy and viscous media. The impeller is of the internal vortex type. The liquid is handled by means of the vortex motion created by the impeller which does not come into direct contact with the pumped liquid. The design uses the pump casing, the bearing part from the TCH series and derived series. The highly efficient characteristics are therefore retained, with the added bonus that the number of spare parts to be stocked can be reduced. The design uses the pump casing, the bearing part from the TCH series and derived series. The highly efficient characteristics are therefore retained, with the added bonus of reducing the number of spare parts to be stored. Shaft seals single or double mechanical seal (ISO 3069 / UNI EN 12756) Cartridge seal and stuffing box seal in various designs. Dimensions are in accordance with ISO 2858/DIN 24256 and are identical to the pumps in TCH. Pump and seal housings can be fitted with heating or cooling jackets as required. From the TCH series are derived the TCT series - Vortex pumps, the TCA series - open impeller and the TCD series - Thermal oil pump; all designed for very specific pumping applications. All these series use several common components. Units up to 30 kW can be close coupled, with the addition of a lantern piece to B5 flange motors. This monoblock design provides alignment advantages, easy assembly and guarantee of perfect alignment, even after transportation.

The TCA is a chemical centrifugal pump with a fully open impeller, designed for handling abrasive liquids as well as suspensions and solids. The impeller rotates between two wear plates, front and rear, which can be easily replaced in case of prolonged wear. The special four-blade hydraulic profile offers high hydraulic efficiency and low NPSH requirements. The design uses the pump housing, the bearing part from the TCH series and derived series. The highly efficient characteristics are therefore retained, with the added bonus that the number of spare parts to be stocked can be reduced. The design uses the pump casing, the bearing part from the TCH series and derived series. The highly efficient characteristics are therefore retained, with the added bonus of reducing the number of spare parts to be stored. Shaft seals single or double mechanical seal (ISO 3069 / UNI EN 12756) Cartridge seal and stuffing box seal in various designs. Dimensions are in accordance with ISO 2858/DIN 24256 and are identical to the pumps in TCH. Pump and seal housings can be fitted with heating or cooling jackets as required. From the TCH series are derived the TCT series - Vortex pumps, the TCA series - open impeller and the TCD series - Thermal oil pump; all designed for very specific pumping applications. All these series use several common components. Units up to 30 kW can be close coupled, with the addition of a lantern piece to B5 flange motors. This monoblock design provides alignment advantages, easy assembly and guarantee of perfect alignment, even after transportation.