Controll Top T.VIS® Q-15
Safe control and monitoring of overflow valves in breweries, dairies, fruit juice production plants and in the pharmaceutical industry.
The T.VIS® Q-15 used to control and monitor overflow valves of the VARIVENT Q series can optionally be equipped with solenoid valves. The proximity switch is mounted in the valve lantern as standard.
In addition to the safe control and monitoring of Q-valve-specific functions, the T.VIS® Q-15 offers the possibility to mount the control top directly on the Q-valve.
- Easy installation directly on the valve
- Low energy consumption
- Reduction of operating costs
- Filter protects solenoid valves
- High-quality pneumatic fittings
- Exchangeable compressed air connection
- Standard protection class IP69
The T.VIS® Q-15 is equipped with a valve-specific proximity switch for position detection in the lantern. The necessary wiring for control and feedback is carried out via an externally accessible M12 connector. Thanks to the initial initialization carried out at the factory, the only required adjustments for operation are to be made on the proximity switch. The buttons located inside the T.VIS® can be used for reinitialization after a reset. The push buttons are secured electronically against inadvertent or incorrect operation, while in operating mode. The supply air connection is equipped with a replaceable filter to protect the built-in solenoid valves.
By using an optionally solenoid valve in the control top, the valve disc of the Q valve can be lifted, for example, for cleaning purposes. The proximity switch in the lantern serves as feedback of the valve disc position for processing in the PLC.
By actuating an optional solenoid valve in the control top, the closing force of the spring-loaded actuator can be increased. Two integrated status messages, which can be processed in the PLC, indicates if the D-Force function is active or inactive.
Related products
-
IO-Link for the T.VIS® A-15
IO-Link is the first globally standardized IO technology (IEC 61131-9) to communicate with sensors and actuators. The powerful point-to-point communication is based on the long-known 3-wire sensor and actuator connection without any additional requirements for the cable material. Therefore, IO-Link is not a fieldbus, but the evolutionary advancement of the existing and proven connection technology for sensors, actuators and thus also for control tops of the latest generation. -
LEFF® Function - Low Emission Flip-Flop
Reducing water consumption is a key priority in sustainable production. GEA's electronic LEFF function can save more than 90% water and cleaning agents during valve seat cleaning. -
Control top T.VIS® E-20
The T.VIS® E-20 is specially designed to meet the requirements of the liquid processing industry as well as dust explosion protection. In addition, all components of this control top are standardized to the utmost degree. This ensures the simplest and most time-saving handling with high reliability and safety. The technology of the T.VIS® E-20 is based on two separate, magnet-based sensors combined in one sensor module. They are used to detect the valve position and provide the corresponding feedback signals for automated plant operation. The sensor module also provides the optional connection for the pilot solenoid valves to control the valve actuators. -
Control Top T.VIS® A-15
Development has focussed on the requirements and necessities of our customers from the fluid-processing industry. In addition to safe control and monitoring of all functions of the process valves in breweries, dairies, plants for manufacturing fruit juices as well as pharmaceuticals, the T.VIS® A-15 offers significant advantages that are directly reflected in lower total cost of ownership.
"*"indicates required fields
Do you want to find contact details for a specific person or office?
Here you will find all our contact details.
With Colly Flowtech you always get
